User manual CLARION MS2004

[. . . ] ongratulations on your purchase of this Ungo System. Please read this manual thoroughly to familiarize yourself with your system's components and operation. Discuss any questions you might have with your installing dealer. C Record the serial number of your Ungo system and keep all dealer records and receipts. Be sure to discuss the installation with the dealer so that you understand the specifics of the installation in your vehicle. Table of Contents 1. [. . . ] The sensors will remain bypassed until the next time the system is armed. Remote Disarming To Disarm the System: Press Button 2. · The siren/horn will chirp twice. * · The doors will unlock. · The parking lights will flash twice. ** · The LED will turn off. * The siren chirps and light flashes during disarming will alert you if the system had been triggered while armed. Turn off the ignition. * · The status LED will begin to flash quickly. · Once all doors are closed and the dome light is turned off, the LED will turn off. After 20 seconds, · The siren will chirp (if Passive Arming with chirp is selected). · The doors will lock. ** · The status LED will flash red, indicating the system is armed. The system is now armed. * The ignition must have been on for at least 10 seconds before the Passive Arming sequence will begin. ** If the Passive Locking feature is selected. To temporarily disable Passive Arming, you can turn the ignition key on then off within 10 seconds. The status LED will stop flashing, and the system will not passively arm until the next time the key is on for more than 10 seconds. This feature is useful for turning off passive arming when refueling or washing the car or if you want to sit in your car and do not want the system to arm. Panic Mode Allows you to instantly trigger the alarm in an emergency situation using the Remote Transmitter. Page 6 - MS2004 Owner's Manual To enter Panic Mode: 1. Press Button 1 again to stop panic and place system into the Armed state. Press Button 2 to stop panic and place system into the Disarmed state. If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and the system will return to its prior Armed/Disarmed state. Coded Emergency Override In case your Remote Transmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that you have your ignition keys ready and that you know the location of the Override switch before you perform this procedure. · Because the system is armed, the system will trigger and the siren will be sounding. Press the Override switch a number of times equal to the disarm code and continue holding for 10 seconds on the last press. If the disarm code is not entered correctly, turn off the ignition and begin again at step 3. Note: During installation, your installer can program the system to give 15 second entry delay when the system Arms passively. When the door is opened while the system is Armed, the siren will give a series warning of chirps before sounding, giving you time to perform the emergency override procedure. Setting the Emergency Override/Disarm Code The default setting for the Emergency Override Disarm Code is 1. To change the Emergency Override Disarm Code: 1. Enter the desired disarm code then continue to hold the Override switch on the last press for 10 seconds. [. . . ] The warranty is limited to Ungo Security systems that have been installed by an approved Ungo dealer and is extended to the Original Purchaser ("Owner") and to the original vehicle in which it was installed only, and is not transferable to any subsequent owner or owners of the product(s). All other products (including those products of other manufacturers which are supplied by Ungo Security as a part of, or an accessory to, an Ungo Security-manufactured product) are warranted by Ungo Security for a period of one year from the date of sale to the Owner. For specific identification of such products contact Ungo Security. This warranty shall not cover: (I) any damage caused by Owner's negligence or misuse of any kind, or any damage due to causes unrelated to Ungo Security's manufacturing, including, but not limited to improper servicing or repair by someone other than Ungo Security or an authorized service facility: (II) alterations or modifications to the Ungo system other than the addition of an authorized accessory: or (III) improper installation or removal from the vehicle contrary to Ungo Security's instructions. [. . . ]