User manual CLARION MS2007

[. . . ] C ongratulations on your purchase of this Ungo System. Please read this manual thoroughly to familiarize yourself with your system's components and operation. Discuss any questions you might have with your installing dealer. Record the serial number of your Ungo System and keep all dealer records and receipts. [. . . ] · The LED will turn on red, indicating the doors, hood and trunk inputs are activated. * The siren chirp(s) during Arming will alert you the condition of the system and vehicle when the system is armed. 1 chirp 1 + 4 chirps = = normal arming door, hood, or trunk open During Arming, if the system detects a bad sensor or an open zone, the system will ignore that input, but keep all other areas protected. 3. After 10 seconds: · The LED will begin blinking, indicating that the shock sensor is activated. While the system is Armed, the system will trigger if: · The doors are opened. · The shock sensor detects an impact to the vehicle. · The hood or trunk is opened. When triggered, the siren will sound, and the parking lights will flash and the horn will honk (if connected). If the system is triggered by the doors, hood, or trunk, the system will alarm for 40 seconds. If triggered by the shock sensor, the system will alarm for 20 seconds. Turn the ignition off to save the selection. MS2007 Owner's Manual - Page 7 Passive Arming When the Arming Mode has been set for Passive Arming, the system arms itself automatically, each time the ignition is turned off and all of the doors, hood and trunk are closed. Turn off the ignition. * · The status LED will begin to flash quickly. · Once all doors are closed and the dome light is turned off, the LED will turn off. After 20 seconds, · · · · · The The The The The siren will chirp (if Passive Arming with chirp is selected). doors will lock. ** status LED will flash red, indicating the system is armed. The system is now armed. * The ignition must have been on for at least 10 seconds before the Passive Arming sequence will begin. ** If the Passive Locking feature is selected. To temporarily disable Passive Arming, you can turn the ignition key on then off within 10 seconds. The status LED will stop flashing, and the system will not passively arm until the next time the key is on for more than 10 seconds. This feature is useful for turning off passive arming when refueling, washing the car, or if you want to sit in your car and do not want the system to arm. Panic Mode Allows you to instantly trigger the alarm in an emergency situation using the Remote Transmitter. Press Button 1 again to stop panic and place system into the Armed state. Press Button 2 to stop panic and place system into the Disarmed state. If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and the system will return to its prior Armed/Disarmed state. Page 8 - MS2007 Owner's Manual Emergency Override In case your Remote Transmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that you have your ignition keys ready and that you know the location of the Override switch before you perform this procedure. · Because the system is armed, the system will trigger and the siren will be sounding. [. . . ] The warranty is limited to Ungo Security systems that have been installed by an approved Ungo dealer and is extended to the Original Purchaser ("Owner") and to the original vehicle in which it was installed only, and is not transferable to any subsequent owner or owners of the product(s). All other products (including those products of other manufacturers which are supplied by Ungo Security as a part of, or an accessory to, an Ungo Security-manufactured product) are warranted by Ungo Security for a period of one year from the date of sale to the Owner. For specific identification of such products contact Ungo Security. This warranty shall not cover: (I) any damage caused by Owner's negligence or misuse of any kind, or any damage due to causes unrelated to Ungo Security's manufacturing, including, but not limited to improper servicing or repair by someone other than Ungo Security or an authorized service facility: (II) alterations or modifications to the Ungo system other than the addition of an authorized accessory: or (III) improper installation or removal from the vehicle contrary to Ungo Security's instructions. [. . . ]