User manual CLARION NX700

[. . . ] Owner's manual & Installation manual NX700 2-DIN MEMORY NAVIGATION & DVD MULTIMEDIA STATION WITH 7-inch TOUCH PANEL CONTROL CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www. clarion. com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www. clarion. com to register your Clarion product. [. . . ] If the iPod is frozen, disconnect it, reset it, and reconnect it again. Owner's manual Error 3 (USB memory) Error 3 (iPod) Error 5 (iPod) The connected iPod is not recognized. Bus Error Over-current or data error is detected. Turn off the ignition switch, disconnect the device, restart the engine and reconnect it again. If the device is still not recognized, try replacing with a different device. Disconnect the device, and reconnect directly to the USB connector of this unit without using the USB Hub. Perform the operation such as skipping a file. (Repeat and random playback mode may be canceled. ) Device Error The device is connected via the USB Hub. Files not supported by this unit are played. DRM Not Support If an error display other than the ones described above appears, press the Reset button. If the problem persists, turn off the power and consult your store of purchase. · The frequencies of radio stations, setting data, etc. stored in memory are not cleared even when the Reset button is pressed. NX700 55 10. SPECIFICATIONS FM Tuner Frequency Range: 87. 9 MHz to 107. 9 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 38 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Input Audio input sensitivity: High: 0. 65 V (at 2 V output) Mid: 1. 3 V (at 2 V output) Low: 2. 0 V (at 2 V output) (input impedance 10 k or greater) Video input: 1. 0 ±0. 2 Vp-p (input impedance 75 ) Bluetooth Specification: Bluetooth Ver. 2. 0 + EDR Profile: HFP (Hands-Free Profile) DUN (Dial-up Networking Profile) SPP (Serial Port Profile) Send/Receive Sensitivity: Class 2 6-3/4" (171 mm) 6-5/16" (160mm) 2" (25mm) English Owner's manual Video Output Video output: 1. 0 ±0. 2 Vp-p (output impedance 75 ) AM Tuner Frequency Range: 530 kHz to 1710 kHz Usable Sensitivity: 28 dBV LCD Monitor Screen Size: 7-inch wide type 6" Width (152 mm) × 3-5/16" Height (85 mm) Display method: Transmission type TN liquid crystal display Drive method: TFT (thin-film transistor) active matrix driving Pixels: 336, 960 (1440 × 234) DVD Player System: Digital Versatile Disc System with CDDA capable Usable discs: DVD video disc, Compact disc Frequency Response: 20 Hz to 20 kHz (CD) (±1 dB) Signal to Noise Ratio: 100 dB (1 kHz) Dynamic Range: 100 dB (1 kHz) Distortion: 0. 01% General Power source voltage: 14. 4 V DC (10. 8 to 15. 6 V allowable) Ground: Negative Current consumption: 3. 5 A (1 W) Auto Antenna Rated Current: 500 mA less Dimensions of the Main Unit: 7" Width (178 mm) × 3-15/16" Height (100 mm) × 6-5/16" Depth (160 mm) Weight of the Main Unit: 2. 6 kg Dimensions of the Remote Control Unit: 1-3/4" Width (43. 4 mm) × 1/2" Height (12. 5 mm) × 4-1/2" Depth (112. 7 mm) Weight of the Remote Control Unit: 60 g (including battery) USB Specification: USB 2. 0 Full Speed File system: FAT12/16/32, non-VFAT-compliant Playable audio format: MP3 (. mp3): MPEG 1/2 Audio Layer-3 WMA (. wma): Ver. 7/8/9. 1/9. 2 AAC (. m4a): AAC format encoded by iTunes and iTunes+ only Maximum number of folders: 512 Maximum number of files: 255 (for a folder) Maximum folder hierarchy: 8 levels (including Root) Maximum power supply: 500 mA Audio Amplifier Maximum power output: 200 W (50 W × 4) Speaker impedance: 4 (4 to 8 allowable) 7" (178 mm) 3-15/16" 100 mm Note: · Specifications comply with JEITA Standards. · Specifications and design are subject to change without notice for further improvement. Power Output: 20 W x 4 Channels RMS [4 @ 14. 4 V 1 % THD+N] Signal to Noise Ratio: 84 dBA (reference: 1 W into 4 ) 56 NX700 INSTALLATION AND WIRE CONNECTION MANUAL 1. SAFETY PRECAUTIONS Symbol Identification This manual uses symbols and icons to indicate safety precautions and concerns during the installation procedure. Be sure to carefully read and understand each precaution prior to beginning the installation. English Installation Precautions INSTALLATION MANUAL WARNING · When installing the unit to a vehicle with an airbag system, never install it in a place where it may affect the operation of the airbag. · Do not install this unit in the following locations: A location interfering with the driver's visual range or operation. A location where the gear shift or brake pedal are hindered. A location where passengers are at risk. An unstable location, or where the system may fall. CAUTION CAUTION WARNING This symbol is intended to alert the user to the presence of important operating instructions. Failure to heed the instructions may result in severe injury or death. CAUTION This symbol is intended to alert the user to the presence of important operating instructions. Failure to heed the instructions can result in injury or material damage. CAUTION · Do not install the system in the locations described below. This may cause a fire, accident or electrical shock: A location exposed to rain or dust. An unstable location, or where the system may fall. [. . . ] The details of the call display on the screen such as name, number, date, and time. Depending on your mobile phone model, not all information will be displayed. Tap . 6 NOTE: If you need to input other numbers during a call, such as an extension number, tap Phone Dialer on the Phone Menu to open the keypad and tap the digits. Redialing a Recently Dialed Number To make a call using a recently dialed number: 1. Do one of the following: When in Phonebook, tap . When in Call Log, tap . 2. [. . . ]