User manual CLARION RAX650DZ

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones RAX650Dz AM/FMCASSETTEPLA YER WITHCD/MDCHANGERCONTROL · LECTEURDECASSETTEAM/FMAVEC COMMANDEDECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDE CASETESCONCONTROLDECAMBIADORDE DISCOSCOMAPCTOS/MINIDISCOS OPEN T Clarion Co. , Ltd. 1998/11 (A·C) All Rights Reserved. Copyright © 1998: Clarion Co. , Ltd. Printed in China / Imprimé en Chine / Inpreso en China PE-1650B 280-7248-00 Thank you for purchasing the Clarion RAX650Dz. Please read this owner's manual in its entirety before operating this equipment. [. . . ] This function continues automatically until it is canceled. "RPT" lights in the display and the current track is repeated. To cancel the repeat play, press RPT button 6 again. "RPT" goes off from the display and normal play resumes. Blank tape skip The blank tape skip allows you to skip blank sections of tape that are over 12 seconds long. Press and hold RPT button 6 for 1 second or longer. "BLS" lights in the display and the mechanism fastforward to the next track selection. To cancel the blank tape skip, press and hold RPT button 6 for 1 second or longer again. "BLS" goes off from the display and normal play resumes. Notes: The APC, intro tape scan, tape selection repeat and blank skip may not work properly with tapes of the following qualities: · Tapes on which the recording level is too low. · Tapes on which there is much noise between selections. · Tapes on which there are long pauses in the middle of selections. · Tapes on which there are less than 4 seconds of blank space between selections. Dolby noise reduction system The Dolby noise reduction system increases the volume level of high frequency sounds during recording and sets it back to their original level during play. This system reduces hissing noise which is typical of cassette tapes. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 1. Press DOLBY NR button 7 to select Dolby noise reduction. Each time you press DOLBY NR button 7 , the Dolby changes in the following order: DOLBY B NR ON§DOLBY NR OFF§DOLBY B NR ON. . . . When DOLBY B NR ON is selected, "DOLBY B NR" appears in the display. Intro tape scan The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played. This function continues automatically until it is canceled. Press SCN button 5 to start the intro tape scan. "SCN" lights in the display. RAX650Dz 15 Other Handy Functions Setting the clock 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button $ to select "CLOCK". [. . . ] When listening to a tape recorded with Dolby NR, press DOLBY NR button 7. 22 Tape RAX650Dz 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display ERROR 1 Cause Tape cannot be played due to defective tape such as cut tape. A CD inside the CD changer is not loaded. [. . . ]