User manual CLARION RDX755DZ

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones RDX755Dz AM/FMCDPLAYER WITHCD/MDCHANGERCONTROL · COMBINÉRADIO/CDAM/FMAVECPILOTE DECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDEDISCOS COMPACTOSCONCONTROLDECAMBIADOR DEDISCOSCOMPACTOS/MINIDISCOS RDX755Dz Clarion Co. , Ltd. 1998/11 (S·C) All Rights Reserved. Copyright © 1998: Clarion Co. , Ltd. Printed in China / Imprimé en Chine / Inpreso en China PE-2174B 280-7233-00 Thank you for purchasing the Clarion RDX755Dz. Please read this owner's manual in its entirety before operating this equipment. [. . . ] Press the left side of SEARCH button % twice to move to the beginning of the previous track. Listening to a CD already inserted Press FNC button 3 to select the CD mode. If no CD is loaded in the unit, "NO DISC" appears in the display. Pausing play 1. Press Play/pause button 2 to pause play. "PAUSE" appears in the display. To resume CD play, press Play/pause button 2 again. 14 RDX755Dz CD Operations Fast-forward/fast-backward q Fast-forward Press and hold the right side of SEARCH button % for 1 second or longer. q Fast-backward Press and hold the left side of SEARCH button % for 1 second or longer. Other Handy Functions Setting the clock 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "CLOCK". Press the right or left side of SEARCH button % to select the hour or the minute. Tur n the Rotar y knob & clockwise or counterclockwise to set the correct time. The clock is displayed in 12-hour format. Top function The top function resets the CD player to the first track of the disc. Press TOP button # to play the first track (track No. 1) on the disc. Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is canceled. The scan play is useful when you want to select a desired track. 1. Press SCN button 5 to start track scanning. To cancel the scan play, press SCN button 5 again. "SCN" goes off from the display and the current track continues to play. 6. Press ENT button 2 to store the time into memory. Press ADJ button 4 to return to the previous mode. Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Dimmer level setting You can reduce the display illumination linked to the car illumination. The factory default setting is "LEVEL 3". Repeat play The repeat play continuously plays the current track. This function continues automatically until it is canceled. [. . . ] Take the measures described below to eliminate the problem. Error Display ERROR 2 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. A CD inside the CD changer is not loaded. [. . . ]