User manual CLARION RMX855DZ

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones AM/FMMDPLA YERWITHCD/MD CHANGERCONTROL · LECTEURMDAM/FMAVEC COMMANDEDECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDE MINIDISCOSCONCONTROLDECAMBIADOR DEDISCOSCOMPACTOS/MINIDISCOS RMX855Dz Clarion Co. , Ltd. 1998/12 (CL·C) All Rights Reserved. Copyright © 1998: Clarion Co. , Ltd. Printed in China / Imprimé en Chine / Inpreso en China ISR PE-4015B 280-7234-00 Thank you for purchasing the Clarion RMX855Dz. Please read this owner's manual in its entirety before operating this equipment. [. . . ] You can set the illumination pattern you prefer. The factory default setting is "PATTERN 1". NON-FADER output adjustment display on/off If you do not want to adjust the non-fader output level, you can turn off the "NON-FAD VOL" display. The factory default setting is "ON". Even if you set the level adjustment display to "OFF", a signal is output from the non-fader output. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "PRISM KEY". Turn the Rotar y knob & clockwise or counterclockwise to set the illumination pattern. Each time you turn the Rotary knob &, the illumination pattern changes in the following order: PATTERN 1 § PATTERN 2 § OFF § PATTERN 1. . . PATTERN 1: The color changes for each function mode, station tuning, scanning and other operations. PATTERN 2: In addition to the changes in Pattern 1, the color changes according to the audio level. OFF: The color changes according to the function mode. Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "NON-FADER". Turn the Rotary knob & clockwise to set the non-fader output adjustment display to "ON"; turn it counterclockwise to set the non-fader output adjustment display to "OFF". ON: When A-M button $ is pressed, the "NONFAD VOL" item is displayed. You can adjust the output level. OFF: Even when you press A-M button $, the "NON-FAD VOL" item is not displayed. You cannot adjust the output level. 5. Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. Triggered audio mute for cellular telephones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. Message display When the unit is powered on or off, a message is displayed. The user can turn this message display on or off. The factory default setting is "ON". RMX855Dz 17 8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all the CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FNC button 3 and select the CD changer mode to star t play. [. . . ] An MD is loaded upside-down inside the MD deck and does not play. Displayed when a non-recorded MD is loaded in the MD deck. ERROR 2 A CD inside the CD changer is not loaded. A CD inside the CD changer cannot be played due to scratches, etc. [. . . ]