User manual CLASSE AUDIO CDP-202 V2.2

[. . . ] All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been of­cially approved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. the CE mark certi­es that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety. [. . . ] Disc Menu presents the menu of available chapters, within whatever title you are watching at the moment. Title gives you a list of available titles on the disc you are watching. Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highlighted item up/down/ left/right as you like, from the comfort of your chair. The Enter key allows you to select the highlighted item, having the same effect as if you had pressed the button on the LCD touchscreen. 4 Transport Controls You will ­nd the transport controls used to control the day-to-day playback of discs just below the navigation keys. (previous) will move backward through the chapters or tracks (or the playlist, if you have created one), one step at a time. As with most players, the single exception to this is the ­rst time you press the key, which will take you to the beginning of the track currently playing. Pressing the key again within approximately one second will then take you to the previous track. / (play) will start the disc spinning (if necessary) and start playing the music, as expected. (next) will move forward through the tracks (or the playlist, if you have created one), one track at a time. , (pause) will stop the music but allow the disc to continue spinning; when you press Play, the music will start almost immediately, and it will pick up from where you left off. (stop) applies to both the music and the spinning of the disc. When you press Play, the disc will need to take a few moments to get up to speed prior to playing, and it will play from the beginning of the disc or the playlist (if one has been created for the disc). Repeat will cycle the disc player through its repeat modes. [ (scan reverse) provides a rewind function, the nature of which is dictated by your navigation preference selection in the menu system. (See The Menu System for more information. ) ] (scan forward) provides a fast forward function, the nature of which is dictated by your navigation preference selection in the menu system. (See The Menu System for more information. ) ^ (eject) will cause the inserted disc to spin down and then eject. System Controls The remote control can also be programmed to perform user de­ned functions through the Fkeys. F1/F2/F3/F4 keys are available for controlling features not covered by the other buttons on the remote control. You are able to choose what the disc player does when it receives the infrared signal from a particular Fkey. [. . . ] A disc was inserted, but the machine rejected it and asked for another disc to be inserted. Ensure that the disc surface is clean, and try reinserting it. The disc is spinning but there is no sound in one or both channels. Check that both interconnect cables are properly connected between the outputs of the disc player and the inputs of your preampli­er. [. . . ]