User manual CLASSE AUDIO CDP-502 V2.0

[. . . ] Owner's Manual CDP-502 Reference Disc Player WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED PERSONNEL. NOTICE All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. [. . . ] · The Numeric Keypad can be used to access specific tracks/ chapters directly from your remote control. Simply press the appropriate number key (or keys) followed by the Play key. The CDP-502 will go directly to your selection and begin to play. For example, to play track 12, press the 1, 2, and Play keys in sequence. 19 · Time cycles through the four time display modes: time elapsed on track time elapsed on disc time remaining on track time remaining on disc · Prog (for Program) allows you to quickly and easily create a programmed sequence of tracks (or chapters) to be played on the current disc. Pressing Prog will take you directly to the program page of the menu system, regardless of where you might be. Once on the program page, you can change the highlighted track using the Up and Down buttons, and can use the Enter button to toggle whether it is included in the current program. Pressing Prog a second time returns you to wherever you had been. (Note that the program function is not available during play or pause, only when the CDP-502 is in stop. ) · Vol (for Volume) buttons raise and lower the output level of the CDP-502, assuming you are using the analog outputs in their variable output mode. If you set the analog outputs to their fixed, line-level setting, or if you are using the digital output to your preamplifier/processor, these buttons will have no effect. · Mute will engage the mute function of the CDP-502 as you have defined it (either Classic, Specific, or Dampening; see The Menu System for more details). 3 Navigation Keys The central section of the remote control contains the navigation keys. This array of keys is similar to what you may have seen on remote controls for DVD players, and is used for navigation of the menu system of the CDP-502. · Setup serves two functions: it calls up the menu system when you need it in order to adjust something to your preference; once within the menu system, pressing Setup returns you to the previous level of the menu system. If you press Setup when at the top level of the menu system, it will take you back out of the menu system to the normal display. · Home returns you to the normal display of chapter/track, time, and transport controls shown on the LCD screen on the front panel of the CDP-502. This provides a quick way to get back to normal operation, regardless of how deep you might be in the menu system. a note about DVD menus: The DVD standard supports two levels of menus: 1) a menu of available "titles" on the disc (e. g. , the main movie, plus extra "bonus" materials like documentaries, etc. ); 2) each "title" then has a subordinate menu of chapters within the title. 20 · Disc Menu presents the menu of available chapters, within whatever title you are watching at the moment. (See explanation of DVD menus in this section. ) · Title gives you a list of available "titles" on the disc you are watching. (See explanation of DVD menus in this section. ) · Up/Down/Left/Right keys allow you to move within a particular menu screen, changing the highlighted item up/down/ left/right as you like, from the comfort of your chair. · The Enter key allows you to select the highlighted item, having the same effect as if you had pressed the button on the LCD touchscreen. 4 Transport Controls You will find the transport controls used to control the day-to-day playback of discs just below the navigation keys. · (previous) will move backward through the chapters or tracks (or the playlist, if you have created one), one step at a time. [. . . ] If any units do not appear on the CAN-Bus Devices screen. If the unit remains absent on the CAN-Bus Devices screen or if the select button is disabled when you target the unit. Check that the unit is running the latest software. The target unit may not be CAN-Bus ready and should be updated with the current software from the Classé website http://www. Classeaudio. com/support/service. htm Check the connections. [. . . ]