User manual CLATRONIC AKS 825

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. [. . . ] Special safety information for this unit Vacuum only dust and small crumbs. Wall holder Mount the wall holder with the supplied screws and dowels. After mounting the wall holder: · If you want to charge the batteries, first remove the nozzle attachments and then insert the device first into the upper bracket of the wall mounting. Then press the handle lightly until the device locks in place. The charging time is approximately 16 hours the first time, and then approximately 8 hours. In order to start vacuuming you have to press the ON/OFF switch (4) and keep it pressed. Once you have finished or when the batteries are down, connect the vacuum to the charger as described in , , Charging the Batteries". Please ensure that you always use the attachment when vacuuming up liquids (insert the extension of the attachment into the device until the nozzle is flush). Always unplug the device before cleaning!The dust container can be released with the release knob (2) and then pulled off from the top downwards. remove the dust filter (10) by turning the insert anticlockwise (OPEN) and tapping it out. After emptying the container several times, it can also be cleaned in water. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice!The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]