User manual CLATRONIC CDK 642 NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] Before operating the machine for the first time, remove the transport safety device from the CD player if it is still in place. Headphone Socket If you want to listen on headphones you should use headphones with a 3. Switching On/Off Switch the device on by turning the volume control (20) in a clockwise direction and then adjusting the volume to the desired level. To switch the device off, turn the control to the left until it is heard to click into place. You should also take out the batteries if the device is not going to be used for a prolonged period. Insert a CD with the printed side facing forwards and close the CD deck. , , - -" appears in the display (7) followed by the number of tracks. Press the / II PLAY/PAUSE button (11) in order to play the CD. With + SKIP/SEARCH (2) you can jump to the next or next-but-one track etc. If the button is held down, the music search starts. The - SKIP/SEARCH button (2) can be used as follows: Press once = Press twice = Press three times = the current track is repeated from the beginning. If the button is held down, the music search starts. In order to remove a CD, please press the compartment and lift the CD out carefully. PLAY/PAUSE (11) When a CD is playing Playback can be briefly interrupted. REPEAT (18) When a CD is being played the REPEAT button has a repeat function. First start the CD and then press the REPEAT button. the current track is repeated continuously. Press twice (REPEAT display (17) lights up): The entire CD is repeated continuously. press three times: The function is deactivated. Programmed Repeat with the PROGRAM Button This can be used to program any desired sequence of tracks. Use the SKIP/ SEARCH +/- buttons (2) to select the desired track and then press the PROGRAM button (16) again. Select the next track with the SKIP/SEARCH +/- key (2) and press the PROGRAM key (16) again. [. . . ] Without proof of purchase no free replacement or repair will be carried out. If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]