User manual CLATRONIC CDP 512 NEW

[. . . ] When using external mains supply, pay attention to the correct polarity and voltage. Always place the batteries in the correct direction. Assemble the device in such a way that the available ventilation openings are not covered. Incorrect repairs can constitute a considerable risk for the user. [. . . ] AC Adapter Mode You can also use the device with an adapter. Connect the CD player to the AC adapter by connecting the jack of the adapter into the 4. Make sure that there are no batteries in the battery compartment. Key block protecting against the accidental pressing of keys. The machine is switched off by pressing the Stop/Off button once, or twice if one of the devices is still running. It will also switch off automatically if not operated for approx. Insert a CD with the label facing upwards and press carefully over the button until it snaps into place. The number of tracks and the total play time appears on the display. After a few seconds the total number of songs/tracks on the CD will appear on the display. In order to remove the CD, press the STOP key, open the CD deck with the OPEN key and pull out it carefully. SKIP/SEARCH: Using this button you can jump to the next or previous title. If the button is kept pressed down, the machine starts to search through the tracks. By pressing once again, the unit is switched off. ANTI SHOCK: it fills the 10-second electronic memory to protect against the jumping of the CD. MODE: The following functions can be selected with the MODE key: Press once = , , REPEAT ONE": the current track is repeated continuously; Press a second time = , , REPEAT ALL": the whole CD is played continuously; Press a third time = , , INTRO": all the tracks are played 10 seconds each; Press a fourth time = , , SHUFF": all the tracks are played one after other at random. The memory slot number can be seen on the right. Select the desired track with the SEARCH button and press the PROGRAM key again. Select the next track with the SEARCH key and press the PROGRAM key again. Repeat the procedure until all the desired tracks are selected. Press once the Stop key to stop the playback while retaining the program. [. . . ] Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]