User manual CLATRONIC CTV 580 ST

[. . . ] The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Proof of the guarantee is provided by the proof of purchase. [. . . ] When lock is activated, and you want switch on TV, you must enter the code by using the 0, 1, . If you want cancel the code, you must select the Setup Function menu, then highlight Lock, and using the VOL+ or VOL- keys cancel the lock (No). The green indicator on front panel turns to red. If you want to switch TV on, you must press the P+, P-, 0, 1 . 9 keys on the remote control or the P+, P- keys on front panel. 9 keys, the required programs or Teletext pages are selected. If you want to switch the menu off, press this key one or two times more. Also used to highlight the function you wish to use within menu. The keys of the next or the previous page in Teletext mode. -/-Selection of one-figure or two-figure programme number. RECALL A key for return to the previous programme. Coloured keys RED, GREEN, YELLOW, BLUE keys are used for quick access to Teletext topics (depends on Teletext properties). By pressing this key the AV1, AV2, RGB, TV are selected in series (more details in chapter "AV modes" ). Press the MENU key twice to return to normal TV picture. If you make a mistake or do not need automatic switching anymore, you can cancel it by selecting Time in Setup menu and pressing OK on the remote control. To switch on and off TV set automatically it must be switched by using the POWER key on the remote control. If you switch off the TV set by using button on the front panel, you will need re-enter the time. You can change succession of stored programmes, give tittles to the programmes (Label), select standards of colour systems' (Colour) and sound (RF Std), hide programmes in list (Skip). Use the P+ or P- keys to highlight Organize. With the Organize menu on the screen, use the P+ or P- to select Pr--, and VOL+ or VOL- to select the number of programme which you wish to move. Use the VOL+ or VOL- keys to select the destination programme number. Then press the remote control key PP and the programme will be moved into the new location. [. . . ] On completion of automatic tuning the first programme is automatically shown on the screen and you can select the desired programme by using the remote control buttons P+, P-, 0, 1, 2 - 9 or front panel buttons P+, P-. For labelling, moving or hiding of tuned programmes you can use the menu Organize. For better picture quality your VCR or satellite receiver should be connected to SCART socket on your TV set. If you do not use the SCART socket, for receiving VCR signal via aerial socket a programme with number 99 is recommended. [. . . ]