User manual CLATRONIC CTV 577 VT PROGRAMMING

[. . . ] Aerial socket Programs' memory Maximum sound output Power requirement Normal used power Dimensions / Weight The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Proof of the guarantee is provided by the proof of purchase. [. . . ] 9 keys on the remote control or the P+, P- keys on front panel. 9 keys, the required programs or Teletext pages are selected. If you want to switch the menu off, press this key one or two times more. Also used to highlight the function you wish to use within menu. The keys of the next or the previous page in Teletext mode. -/-Selection of one-figure or two-figure programme number. RECALL A key for return to the previous programme. Coloured keys RED, GREEN, YELLOW, BLUE keys are used for quick access to Teletext topics (depends on Teletext properties). By pressing this key the AV, RGB, TV are selected in series (more details in chapter "AV modes" ). Press the MENU key twice to return to normal TV picture. If you make a mistake or do not need automatic switching anymore, you can cancel it by selecting Time in Setup menu and pressing OK on the remote control. To switch on and off TV set automatically it must be switched by using the POWER key on the remote control. If you switch off the TV set by using button on the front panel, you will need re-enter the time. You can change succession of stored programmes, give tittles to the programmes (Label), select standards of colour systems' (Colour) and sound (RF Std), hide programmes in list (Skip). Use the P+ or P- keys to highlight Organize. With the Organize menu on the screen, use the P+ or P- to select Pr--, and VOL+ or VOL- to select the number of programme which you wish to move. Use the VOL+ or VOL- keys to select the destination programme number. Then press the remote control key PP and the programme will be moved into the new location. Use the P+ or P- to select the parameter you wish to change: Label (programme title), Colour (colour system), RF Std. Label: Use the VOL+ to select the position of character being added, and use the P+ or P- to select the character from A-Z, +, -, space, 0-9. the title can be up to four characters long. After selecting the first character, use the VOL+ to pass to the next position, or use the VOL- to pass to the previous position, and then use the P+ or P- to select the second character of title, etc. [. . . ] Connect your TV to a 230 VAC power socket. Switch on your TV with the switch on the front panel. If the screen does not light up, press a button P - or P+ on the front of the television set or any of the keys P-, P+, 0, 1, . After switching the television set on by using front panel button, the set switches to the same mode it was before switching of by this button. [. . . ]