User manual CLATRONIC DB 2546 NEW

[. . . ] ⷠAlways remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the device or whenever a disturbance occurs. ⷠIn order to protect children from the dangers of electrical appliances, never leave them unsupervised with the device. Consequently, when selecting the location for your device, do so in such a way that children do not have access to the device. Take care to ensure that the cable does not hang down. [. . . ] before filling the water tank remove the mains lead. Please do not fill the water tank higher than the MAX mark. Numbering of the Controls Steam jet button Steam regulator with self-clean function Filler opening for the water tank Spray nozzle Spray button 6 7 8 9 Control lamp Base Temperature regulator Water tank Clean the ironing base with a slightly damp cloth. The water tank (9) is filled through the replenishing hole (3) with cold water. NOTE: Only clothes should to be ironed with this machine. Electrical connection Make sure that the iron voltage (see name plate) and the line voltage match. Sort out the garments according to their ironing temperatures. it is set with the thermostat (8): ¼ Synthetics , silk (low temperature) ¼¼ Wool (medium temperature) ¼¼¼ Cotton , linen (high temperature) 4. Insert the plug into a socket with earthing protection. As soon as it shuts off, the set temperature is reached (approximately 3 min. Always pull the plug out of the socket after using the iron. Steam Ironing For this a high temperature is needed (cotton, linen). The quantity of steam can be regulated using the steam quantity regulator (2). Extra steam can be added with the steam jet function (1). Vertical Steam: This can be used to produce a jet of steam in a vertical direction. Heat the machine up to its maximum temperature. After the control lamp (6) goes off remove the machine from the mains supply. Now hold the machine horizontally above a sink, turn the steam quantity control (2) to the self-cleaning symbol and rock it to and fro until the tank is empty. When pressed and turned the control switch then returns to the position. Place the machine back on its stand (7) and heat it up again. [. . . ] Should the warranty be valid, please consign the complete appliance in its original packing together with the cash receipt to your local dealer. You are not entitled to the replacement of the appliance owing to broken glass parts and faulty accessories. However, said parts will be replaced free of charge. In this case only the faulty accessory needs to be ordered without sending back the whole appliance! [. . . ]