Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CLATRONIC DO 2852. We hope that this CLATRONIC DO 2852 user guide will be useful to you.
Lastmanuals help download the user guide CLATRONIC DO 2852.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. [. . . ] Then the opener has to be switched off in order to cool down. After being allowed to cool down for a sufficient time the tin opener can then be used again. Take the tin opener in your right-hand and lift the cutting lever (4) with your thumb. Now place the tin which is to be opened on the side of the cutting mechanism with your left hand so that the lower side of the cutting edge is located on the toothed transport wheel (7). press the cutting lever (4) downwards until the cutting blade (6) touches the surface of the tin lid. Bring the adhesive magnet (5) into position by folding it down over the lid of the tin. When the cutting lever (4) is pushed down further the pushbutton (8) is operated and the tin opener switches on. the cutting blade (6) is automatically pulled into the tin lid and cuts it open. The opening procedure can be interrupted at any time by lifting the cutting lever (4). After the tin has been opened, hold it tightly in your left hand and lift the cutting lever (4) with the thumb of your right hand. The lid of the tin which has now been cut off is held by the adhesive magnet (5) and can be removed by hand. Please be careful when removing the lid of the tin from the adhesive magnet (5). The housing of the tin opener can be cleaned externally with a slightly moist cloth. Do not use any acidic or abrasive detergents. [. . . ] Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CLATRONIC DO 2852
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CLATRONIC DO 2852 will begin.
