Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CLATRONIC DR 2765. We hope that this CLATRONIC DR 2765 user guide will be useful to you.
Lastmanuals help download the user guide CLATRONIC DR 2765.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not try to repair the appliance on your own. always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type. Pay careful attention to the following "Special Safety Instructions". [. . . ] pour out any residual water in the boiler. Fill water from a measuring beaker (8) through the funnel (7) into the boiler. Round brush, curved nozzle The round brush and the curved nozzle can be attached to the jet nozzle at the hexagonal joint. The mark on the nozzle and the yellow mark on the device must be aligned with one another. Turn in the direction of the arrow (clockwise) until the mark on the attachment is aligned with the line on the device. 36 The jet nozzle can be used on the hose or directly on the device. the hose (12) has to be attached to the connecting nozzle (2). Then the jet nozzle (11) and the fabric brush (13) can be attached to the end of the hose. Please use the fabric brush (13) together with the cloth (15). The window wiper (14) is hooked below the fabric brush (13). Before inserting the mains lead into the socket, check whether the voltage you intend to use complies with that of the machine. Only connect the machine to a properly installed safety socket, 230 V/50 Hz. After about 3-4 minutes the pressure in the boiler has built up. If there is no more water in the vessel no steam is emitted when the steam switch (4) is pressed. the water has to be filled up as follows: 1. Wait for about 10 seconds and then release the residual pressure by means of the steam switch. Unscrew the safety lock (3) slowly and wait for a few seconds before opening it completely until the excess pressure has escaped. Fill fresh water from the measuring beaker (8) by means of the funnel (7) into the boiler. Take care of water splashes that might come out of the boiler. In order to prevent the water from splashing it should be filled into the funnel slowly after the safety lock has been opened. [. . . ] Without proof of purchase no free replacement or repair will be carried out. If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CLATRONIC DR 2765
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CLATRONIC DR 2765 will begin.
