User manual CLATRONIC DR 564 CD NEW

[. . . ] The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. [. . . ] Insert a CD with the label facing upwards and press carefully over the button until it snaps into place. "- -" appears in the display followed by the number of tracks. The track currently being played and the time that has elapsed are shown in the display. To remove a CD, press the STOP key (10), open the CD deck with the OPEN key and take out the CD carefully. This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. Press a third time = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks. With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks. The following functions can be selected with the REPEAT button Press once = The REP control lamp (18) flashes in the display. the current track is repeated continuously. Press a second time = The REP control lamp lights up in the display. Press a third time = All the functions are reset. FWD buttons to select the desired track and then press the PROG button again. Repeat the procedure until all the desired tracks are selected. Press once the STOP key to stop the playback while retaining the program. To resume the playback of the program press first the PROG key once and then the PLAY/PAUSE key. The device stops automatically once the entire sequence of programmed tracks is completed. The programmed order of tracks remains in the memory until you delete the programme, remove the CD from the CD compartment or switch off the machine. In order to play the programmed order of tracks again, first press the PROG and then that PLAY/PAUSE button. After you have programmed and started the device, please press the REPEAT button up to three times. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]