User manual CLATRONIC DVBT 644 NEW

[. . . ] These operating instructions will help you to use the DVBT 644 digital receiver, briefly referred to as the receiver, · Each person who · Disposes of, this receiver must have read through and noted the entire content of these operating instructions. Always store these operating instructions in the vicinity of the receiver. Various elements of these operating instructions are provided with defined structural features. This enables you to easily distinguish whether this involves normal text, · Read through the safety instructions carefully before commissioning the receiver. [. . . ] Searching for stations This menu may be used to add a station to the list of stations by entering the corresponding information. However, only make use of this option once you are familiar with digital transmission technology and have access to the corresponding information. You may choose between the following options for the station search: · The following settings can be carried out in the "Parental Lock" submenu: · If you would like to call up a protected menu, you will be requested to enter the password (PIN code). Enter the password using the numerical keys. For each number which is entered, a box in the input window is marked with a star. Parental lock Individual channels may be locked in the Channel Manager menu (see Page 41). The "Parental Lock" function may be used to activate or deactivate this lock. If you would like to activate the parental lock, select the option "On". If you do not wish to switch the timer on, select "Off" under "Enable". Switching between radio and TV mode If you find yourself in a menu, leave it by pressing the "EXIT" key. You may only switch to radio mode if this is broadcast by your provider. to switch between radio mode and TV mode , press the "TV/Radio" key. Selecting a channel To switch to the previous or the next channel, press the "CH or "CH " arrow keys on the remote control or the receiver. You may also switch directly to a station by entering the memory space number of the station using the numerical keys. You may carry out individual settings on your receiver via the user interface menus. Select the desired sub-menu using the "CH " and "CH " arrow keys and press the "OK" key. Top: Name of the menu Left: Menu options Right: Miniature view of the channel which is set Bottom:The information bar shows the keys which can be used to navigate in the current menu. Sub-menu Channel Manager Programme Guide Timer Installation Menu options/content TV channels/radio channels See "EPG", see Page 42 Time and date settings, see Page 34 Timer programming, see Page 34 Channel search, see Page 30 System settings, see Page 28 Parental lock, see Page 31 Default settings, see Page 33 Shows information on the receiver and the installed software Tetris Move Snake You may choose between the · Radio channel settings can only be carried out if these channels are broadcast by your provider. Deleting You may completely delete the station from the list of stations. Use the "CH " and "CH " arrow buttons to select the station which you would like to delete. If you would like to delete the station, press the red "TEXT" key on the remote control. If you do not wish to delete the station, press the "EXIT" key. [. . . ] Hybrid Fibre Coax: Designation of a hybrid solution in the connection area of network subscribers in which case glass fibres are not routed continuously from the station to the receiver, but in which existing, coaxial copper cable is used as of a specific point. Free-to-air services: Fee-free services which can be received without a special decoder. The signal which arrives at the input is intercepted again at the output jack for further distribution. Packet Identifier: Identification number of a received data flow; the PIDs ensure that a station can be received in full. [. . . ]