User manual CLATRONIC DVD 534 HC NEW

[. . . ] Caution The CD player works with invisible laser-light. Do not look into this beam and do not abandon yourself to radiation! attention , laser-radiation also inside of the unit!To avoid damages of radiation unit should be opened only by qualified service personnel. [. . . ] Certain video CDs are equipped with a »Play Back Control (PBC) If the DVD receiver is connected to the television by SCART then switch over to the respective Scart input if necessary. If the DVD receiver is connected to the television via the VIDEO or SVIDEO socket then the corresponding video input must be selected at the television. The following mode indicators inform you of the current drive status. Note: If the device is in PAUSE or STOP mode for more than a minute then the screen saver automatically appears. the screen saver disappears on pressing » II PLAY/ PAUSE« 3/39. The screen saver function can always be switched on or off in the BASIC SETTING menu in the SCR SAVER line. Some DVD-CDs contain selection menus for title and sections or a root menu to call up additionally stored information This menu can also contain selection possibilities for camera angle, dubbing languages, subtitle, etc. Depending on the DVD inserted, this menu can be called up by pressing »TITLE« 30, or by pressing »RETURN« 29. The corresponding selection menu then appears on the screen if the DVD or the title currently being played contains a menu. The menu item s are selected with the » / / / « 21 and confirmed by »ENTER« 21. If the menu items are numbered then these can be directly selected using the digit buttons. Playing a video CD with PCB If the video CD inserted is equipped with »Play Back Control (PCB)« then the PCB menu appears on the screen at the start of playback. The menu item s are selected with the » / / / « 21 and confirmed by »ENTER« 21. If the menu items are numbered then these can be directly selected using the digit buttons. Note: ­ During playback of a CD with PBC, the buttons »GOTO« 17, »REPEAT« 25 and the numeric buttons »1-0« do not function. ­ If the PBC function is active then you can switch back to the previous menu by pressing »RETURN« 29. In this case, playback of the video CD is stated using » II PLAY/ PAUSE« 3/39. To continue the playback, keep pressing the corresponding » / « button until "PLAY" appears of press » II PLAY/PAUSE« 3/39. During playback, freeze frame and search mode functions, you can enlarge (zoom) the picture To do this, press »ZOOM« button 18. To look at a frozen frame during playback, press» II PLAY/PAUSE« 3/39. Note: ­ The zoomed picture can be shifted on the screen using the » / / / « 21. ­ Depending on the DVD video or video CD inserted, not all zoom functions are always available. [. . . ] White picture with DVD or video CD No sound from digital out- · Colour system has been set incorrectly The CD was inserted with the wrong side up. CD dirty CD defective Volume has been set too low or mute function is active. Sound source has been incorrectly selected or not switched on. Device is not receiving the signals Batteries too weak Faulty signal due to light sources such as fluorescent lights or energy-saving lights Faulty signals due to other remote control devices Incorrect CD format Incorrect connection Digital output (AUDIO OUT) set incorrectly Incorrect audio format has been selected. [. . . ]