User manual CLATRONIC DVD 552 HC NEW

[. . . ] To avoid the risk of fire or an electric shock, you should not expose the device to rain or moisture. Consequently, do not use the device in the immediate vicinity of water - for example near a bath tub, a swimming pool or in a damp cellar. Use the device only for the intended purpose. When using external mains supply, pay attention to the correct polarity and voltage. [. . . ] DVDs and video CDs can contain films, video clips, television series, and so on. Depending on their content, these CDs may have one or more titles. Every title on a DVD can contain one or more sections (chapters). DVDs that do not contain a »2« on the code label can not be played on this device. Certain video CDs are equipped with a »Play Back Control (PBC). Due to the built-in auto-play function, the DVD automatically starts to play back when. A DVD is already inserted when switching on the DVD receiver (not for every DVD). To look at a frozen frame during playback, press» II PLAY/PAUSE« 3/38. The next single frame appears each time you re-press »STEP« 39. Note: If the device is in PAUSE or STOP mode for more than a minute then the screen saver automatically appears. To switch to slow motion during a freeze frame or playback, press »SLOW« 41. The speed of slow motion is selected by continually re-pressing this button. Some DVD-CDs contain selection menus for title and sections or a root menu to call up additionally stored information. This Menu may also contain selection possibilities for synchronised languages, subtitles etc. The menu item s are selected with the » / / / « 21 and confirmed by »ENTER« 21. If the menu items are numbered then these can be directly selected using the digit buttons. To continue playback, keep pressing »SLOW« button 41 until PLAY appears or press » II PLAY/PAUSE« button 3/38. Playing a video CD with PBC If the video CD inserted is equipped with »Play Back Control (PBC)« then the PBC menu appears on the screen at the start of playback. With some CDs the machine does not start automatically; please use »MENU/PBC« 32. Note: - During playback of a CD with PBC, the buttons »GO TO« 17, »REPEAT« 25 and the numeric buttons »10« do not function. - If the PBC function is active then you can switch back to the previous menu by pressing »RETURN« 29. In this case, playback of the video CD is stated using » II PLAY/ PAUSE« 3/38. [. . . ] Device is not receiving the signals Batteries too weak Faulty signal due to light sources such as fluorescent lights or energy-saving lights Faulty signals due to other remote control devices Incorrect CD format Troubleshooting Check the mains cable. Note: The DVD receiver should be connected directly to the television; do not connect via the video recorder. Check the connections (see page 28-30) Check the sound source; try another playback source. check the connections ( see page 28) Turn the machine to standby using the >>POWER<< 6 button. [. . . ]