User manual CLATRONIC DVD 625 PROGRAMMING

[. . . ] The lightning symbol in the triangle is intended to warn the user against non-insulated , , hazardous voltage" within the housing of the device which may cause electric shocks. Please note the model and serial number which is to be found on the rear of the housing. This information should be stored for future use. Due to the danger of an electric shock, the housing must not be opened (high voltage). [. . . ] When the drive is open insert a CD/DVD with the label facing upwards into the drive. The player automatically begins to check and read the CD/DVD and then begins playback. As soon as the device is connected to a television set or other auxiliary device you can watch or listen to DVD videos, your favourite CD or MP3 files. Playing back a DVD Video Disc Turn on the television set and select A/V mode. If the television set has a SCART connection, the SCART mode must be selected from the television menu. Playing back an Audio Disc Turn on the audio system and select the input source connected to the DVD player (See also the chapter , , AUDIO-SETUP"). For further information on the output format, please see the operating instructions of your television set. Subtitles With this device it is possible to display up to 32 different subtitle languages (depending on the disc that has been inserted). Press the SUBTITLE button repeatedly until the desired language appears. note: The inserted disc must have been recorded in the desired language. Selecting Titles DVDs are normally subdivided into titles, which in turn are split into chapters. This device is able to select a certain title for playback. If the DVD has been recorded with a title menu, a specific title can be selected using this function or the number buttons. A title can also be selected using the number buttons by pressing the corresponding title number. Note: Some discs do not have this function. If necessary, follow the instructions on the screen. Only the basic procedure is described in these instructions. the procedure may vary depending on the content of the DVD. 0 the function of the TITLE button, for example, is to return the device to the menu. Press the LANGUAGE button repeatedly until the desired language appears. In order to switch off the subtitles, press the SUBTITLE button repeatedly until the subtitles disappear. Pressing the ANGLE button repeatedly changes the camera perspective each time. [. . . ] Check whether the disc is designated for use in your region. Check whether any objects are located between the remote sensor located on the front of the device and the remote control. Check whether the disc is clean and free of scratches. Use different software to burn the disc as it is possible that the software version used is not compatible with the DVD player. [. . . ]