User manual CLATRONIC DVD 636 HC PROGRAMMING

[. . . ] In order to avoid risks such as fire or electric shock, please do not expose the device to rain or moisture. In order to avoid risks such as fire, electric shock or interference, please use only the recommended accessories. Please read these precautions carefully before using the device. Protection of the Mains Lead In order to prevent the device from malfunctioning and to protect against electric shocks, fire or injury, please note the following: · Always remove the plug by pulling the plug itself and not the lead. [. . . ] Be sure to set the screen mode on your widescreen TV to "FULL". Some DVD discs do not permit Pan and Scan mode playback and will automatically playback in Letterbox mode, and vice versa. If the 16:9 wide screen option is selected with a standard 4:3 television, the playback picture will appear distorted (objects will look thin). Video Output Setting Video output selection enables you to choose the type of video output suitable for your TV system. S-VIDEO Select S-VIDEO if you have connected the S-VIDEO output to your TV using S-VIDEO jack. Pr/Cr Pb/Cb Y Select Pr/Cr Pb/Cb Y if you have connected the Pr/Cr Pb/Cb Y output to your TV using Pr/Cr Pb/CbY jack. TV display setting The aspect ratio of a television is the relationship between it'width and height that defines the shape of the picture. television sets traditionally have an aspect ratio of 4:3. Since most DVD discs are recorded in "wide aspect ratio" formats, the picture must be adjusted to fit on your screen. NORMAL/PS: (default setting) The Pan and Scan presentation crops both sides of the wide screen format to fill a standard 4:3 television screen NORMAL/LB: The Letterbox presentation places black bars at the top and bottom portions of the screen to provide the full wide screen format of a movie on a standard 4:3 television screen. Select SCART if you have connected the video output to your TV using SCART jack. Angle Mark Setting If the disc contains sequences recorded from different camera angles, this allows you to view the picture from different angles. ENGLISH: (default setting) Screen Saver Setting If set to ON, when you leave the system in stop or pause mode for more than five minutes, the screen saver will be activated. In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be compressed downwards in level. Likewise, the very quiet sounds would be inaudible and must be brought upwards in level to be heard. Dolby Digital satisfies these needs with dynamic range compression. Center Delay Setting If the listening position is closer to the centre speaker than the front speakers, you can set the centre delay time to improve the surround sound effect. options: 5ms , 4ms , 3ms , 2ms , 1ms , or OFF (default setting) . Rear Delay Setting If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the surround sound effect. Use the registration code to purchase or rent the videos from DivX®VOD service at www. Follow the instrucitons and download the video onto a CD-R for playback on this DVD player. All the downloaded videos from DivX®VOD can only be played back on this DVD player. [. . . ] Also DivX 3, DivX 4 and DivX 5 can be played back without problems at low and high data rates. The zoom function of the device also works correctly during playback. With this it is possible to fill the screen even with films of low resolution, such as data transferred via the Internet. Then it is played back like a standard DVD. [. . . ]