User manual CLATRONIC EM 2826 2

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] never immerse the basic device in water. Always remove the mains plug before cleaning the device. Do not cut any frozen food or bones with the electric knife. Do not operate the knife for more than five minutes without a break. Putting the device into operation remove the motor device and the accessories from the box. Also remove any packaging materials that may be present. Wipe all the parts with a moist cloth to remove all the dust that may have deposited on and in the device during transport. Then mount the device again by proceeding in the opposite order. Only hold the blades as near to the ends as possible or by the plastic handling surfaces. assemble the blades as shown in illustration 1 (ABB 1). Insert the ends of the knives into the retainer on the motor device. Press the blades in the direction of the motor device until the ends are felt to lock in place. Switching on Please note that for safety reasons the knife can only be switched on if switches 2 and 3 pressed. Do not exert too much pressure when cutting; allow the knife to do the cutting. After use, please remove the plug from the socket and take out the blades by pressing button 1. Clean the individual parts in the usual way in soapy water. The housing of the motor device can be wiped off with a slightly moistened cloth. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]