User manual CLATRONIC ES 2968 PC 2

[. . . ] Do not try to repair the appliance on your own. always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type. Pay careful attention to the following "Special Safety Instructions". [. . . ] Press the pressure compensation lever (16) on the filter holder (11) before you remove the filter holder. In order to empty the filter holder hold the filter in its position using the filter retaining device (12) on the handle. Turn the filter holder (11) and knock out the used coffee. remove the filter holder after making an espresso. By doing so, you will extend the service life of the rubber seal in the brewing head. To make other espressos, fill the coffee bowl (13 or 14) with coffee powder again and carry out the brewing procedure as described above. Now set the desired steam quantity by carefully turning the steam regulator (3) and moving the collection vessel gently up and down. Once the milk reaches the desired volume, you can warm the milk more by lowering the steam nozzle (10) to the bottom of the container. Do not make the milk boil or the froth will be ruined. Turn the function selector switch (5) back to the O position; the device is now switched off. A cappuccino is usually composed of 1/3 coffee, 1/3 hot milk and 1/3 frothed milk. Before cleaning the device please turn the function selector switch to , , O" and remove the mains plug from the socket. Before cleaning the machine please wait until it has cooled down. The water tank, the drip tray, the drip tray cover of the filters and the filter holder can be cleaned by hand in warm soapy water. If the filter's holes are clogged, clean it with a fine brush. Never immerse the device in water or other liquids. Never wash the parts or accessories in a dishwasher. The more water the drip tray contains, the higher the float rises. To empty the tray you can remove the drip tray completely and lift the grid. After frothing milk, the steam nozzle is to be immediately cleaned from all milk residues. If the milk dries, it becomes difficult to remove. Turn the joint above the steam nozzle through a quarter turn to the left and remove the upper section and the internal pipe (see device overview). [. . . ] Without proof of purchase no free replacement or repair will be carried out. If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]