User manual CLATRONIC FR 2722 NEW

[. . . ] always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type. Pay careful attention to the following "Special Safety Instructions". [. . . ] Do not carry or move the deep fryer if the oil or grease is still hot. When frying dough-like foods scrape off the excess dough and put the pieces carefully into the oil. Rub dry humid foods with a cloth before frying. Remove the frying basket and fill the container with oil or grease (maximum 2. The filling level must be located between the minimum and the maximum level. Insert the plug into a 230 V, 50 Hz socket with earthing protection and switch on the deep fryer. Open the lid and fill the frying basket with the food to be fried. Make sure that the handle snaps upward into place and that the frying basket is located above the hot frying grease. Now lower the frying basket into the hot frying grease by pulling back the button on the handle. You can adjust the deep-frying time with the TIMER. It is possible that the LED goes on and off several times while frying. This is normal and it indicates that the temperature is controlled by the thermostat and is being maintained. At the end of the frying time (the frying time is specified on the package of the food or in the recipe) open carefully the lid (Warning!Let the oil drip from the food being fried. Switch off the appliance and pull the plug out of the socket. Wait until the deep fryer is completely cool before cleaning. Wait in any case for 1 to 2 hours after use before using again to avoid burns. In order to exchange the filter, pull the cover of the filter inside the lid upwards. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge. [. . . ]