User manual CLATRONIC FW 2684 2

[. . . ] This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Please take care that the meat does not contain any bones or sinews. Put the pieces of meat on to the filling tray (1) and into the filler neck (2). Make sure the function switch (14) is turned to , , OFF". Connect the device to a 230 V, 50 Hz safety contact power socket. Turn on the meat mincer with the ON/OFF (14) switch. If necessary push the meat with the presser (5). Please do not follow this up with your fingers. In order to let the spiral (7) run backwards, you switch the equipment off with ON/OFF switch (14) and then operate the AUTO/REV switch (15). Turn the lock , , hand tight" on to the spiral housing. Push the sausage skin (using either real or synthetic skin) over the sausage skin and knot the end. Fill the sausage paste on to the filling tray and into the filler neck. The sausage mixture is pressed through the sausage attachment and filled into the sausage skin. When the first sausage has reached the desired length, squeeze it together with your fingers at the end of the sausage top. Turn the sausage around its own axis once or twice. Tip: You can turn off the device after each single sausage length until you are more experienced. If you decide to use real skin, let it soak in water for a while before use. Take care that the sausage skin is filled , , loosely" as during boiling or frying the sausage expands and the skin might tear. Screw the biscuit attachment on to the device and turn it to the desired biscuit shape. Hold the elongated mixture at the exit and cut it off at the desired length. Pull the power plug out of the socket before cleaning. [. . . ] in such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]