User manual CLATRONIC FW 2924 2

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Do not manipulate any of the safety switches!Only use the feeder piece to push food into the mincer. Clean the machine before using it for the first time as described below under , , Cleaning". Set up the parts as shown in the illustration and ensure that they are firmly in place. Short Time Operation Do not use the machine for more than 5 minutes. Before using it again please let it cool down for at least 2 minutes. Cut the food into pieces, put them in the filler slot, and push them in with the feeder piece after switching the appliance on. The long one is used to make thin sausages, and the thick one is used to make thick sausages. Soak a sausage skin, tie the end of it, and draw it over the sausage-maker head. Fill the feeder nozzle with minced meat (add spices or herbs as desired). Before cleaning remove the mains lead from the socket. For cleaning the outside of the machine use only a damp washing-up cloth. Do not use any sharp or abrasive detergents. Both accessories can be cleaned in soapy water. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice! [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]