User manual CLATRONIC HM 2738 OTHER MANUAL

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Then let it cool down for approximately 10 minutes before using it again!Press the two whisks or kneading hooks on the bottom by turning slightly until they lock in place. If you would like to use the beater, pull the tab on the back of the machine upwards and insert the beater. Please make sure when inserting the beater that the arrow on the machine and the arrow on the rod of the beater are located one above the other. Note: The kneading hook/whisk must be inserted into the correct opening of the mixer!Fix the wall mounting in place with the material supplied. Then press the machine into the wall mounting. In order to remove the hand mixer from the wall mounting, press and hold down the reject button (3). Please ensure that the speed switch (2) is turned to "0/OFF". Insert the kneading hook or whisk into the food to be mixed. Set the desired speed with the speed switch (2): 1. Note: For optimum results use high-walled vessels that are not too large. Turbo Switch (1) This is for switching to maximum speed for a short time. press at short intervals for pulsed mode operation. WARNING: Do not use this function for more than 3 minutes!Releasing the kneading hook / whisk In order to release the hook, press the release button (3). Clean the machine after use with a dry cloth. Clean the equipment in the usual way in soapy water. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]