User manual CLATRONIC HTD 2940 OTHER MANUAL

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Attention: The nozzles become hot during operation. If the hair dryer is used in the bathroom, remove the mains plug after use as water represents a hazard. This also applies when the hair dryer is switched off. As additional protection we recommend the installation of a fault current protection device (RCD) with a rated current of not more than 30 mA in the wiring system of the bathroom. You can dry single hair locks by concentrating the flow of hot air with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair without losing volume. Only connect the machine to a properly installed safety socket, 230 V/50 Hz. Setting the desired blower strength (left switch): Position 0: Position 1: Position 2: COOL-Shot: OFF gentle stream of air strong stream of air With this switch it is possible to interrupt the heating process so that the air can be mixed according to individual requirements. Before cleaning remove the mains lead from the socket. Clean the housing with a soft, dry cloth without additives. Please clean the grill on the air intake side of the hairdryer regularly in order to avoid excessive temperatures as a result of heat accumulation. To do so, please remove the cover of the grill by means of the recess on the top of the hairdryer. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice!The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. [. . . ] Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid! [. . . ]