User manual CLATRONIC KA 2701 OTHER MANUAL

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Carry out 2 or 3 cycles with cold water only to clean the device before brewing the first cup of coffee. The details can be found on the appliance's nameplate. Make sure that the appliance is switched off (The light in the I/O on/off switch is off). Now fill with enough fresh cold water for the desired number of cups. You can read the level on the water level display. As your machine has a permanent nylon filter, you can fill the coffee powder directly into the nylon filter (approx. Lock in the filter until it snaps into place. Your appliance is provided with a drip stop. By removing the pot, before the water runs through the filter completely, it avoids that the coffee drips on the base. If there is still water in the tank or filter, make sure that the pot is placed back under the filter to avoid overflowing. When the coffee stops flowing into the filter, you can remove the pot. If you would like to keep the remaining coffee warm, the switch must remain in the "I" position. The hot plate will keep the coffee warm until you switch the machine "O". Always pull he plug before cleaning and wait for the appliance to cool down. Clean the outside of the appliance, if necessary, with a slightly moist cloth without any detergent. The filter holder can be washed as usual in warm washing up water. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]