User manual CLATRONIC KA 2938 OTHER MANUAL

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] This removes dust which may have collected there during transport. clean the filter pad and the glass pot by rinsing. Carry out 2 or 3 cycles with cold water only to clean the device before brewing the first cup of coffee. The details can be found on the appliance's nameplate. Now fill with enough fresh cold water for the desired number of cups. You can read the level on the water level display. Bend over the lower fold in the filter paper (size 1x4), place it in the filter funnel and fill it with coffee powder (approx. When the coffee stops flowing into the filter, you can remove the pot. Insert the lid of the pot into the holding device provided above the handle. If you would like to keep the remaining coffee warm, the switch must remain in the , , I" position. The hot plate will keep the coffee warm until you switch the machine , , O". It becomes necessary to decalcify the machine when percolation takes considerably longer. Always pull he plug before cleaning and wait for the appliance to cool down. Clean the outside of the appliance, if necessary, with a slightly moist cloth without any detergent. The coffee pot and the filter pad should be cleaned by rinsing in cold water. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]