User manual CLATRONIC KA 2967 PC 2

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. [. . . ] Do not move the machine when it is in operation. Before opening the water tank switch the machine off and allow it to cool down for at least 30 seconds!Putting the device into operation remove all the packaging and transport protections from the device. Wipe all the parts with a moist cloth to remove all the dust that may have deposited on and in the device during transport. Then mount the device again by proceeding in the opposite order. Carry out 2 or 3 cycles with cold water only to clean the device before brewing the first cup of coffee. The details can be found on the appliance's nameplate. Make sure that the appliance is switched off (The light in the I/O switch is off). Now fill with enough fresh cold water for the desired number of cups. You can read the level on the water level display. Fold the paper filter (size 1x4) along the lower folding line and then place it in the filter funnel. please ensure that the filter bag is longer than the filter funnel. Note: Due to the fast brewing process and the high temperature, less coffee powder than normal is required (max. Your appliance is provided with a drip stop. By removing the pot, before the water runs through the filter completely, it avoids that the coffee drips on the base. If there is still water in the tank or filter, make sure that the pot is placed back under the filter to avoid overflowing. When the coffee stops flowing into the filter, you can remove the pot. When pouring the coffee out of the pot, turn the lid through a half turn if you wish to pour slowly and a complete turn if you wish to pour quickly. To keep the coffee warm, put the lid back on (The dot on the lid is pointing towards the handle). Always pull he plug before cleaning and wait for the appliance to cool down. [. . . ] in such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]