User manual CLATRONIC KA3756

[. . . ] When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories. Do not operate the appliance without supervision. If you leave the room you should always turn the appliance off. The appliance and the mains lead have to be checked regularly for signs of damage. [. . . ] 5 minutes after which the appliance turns off automatically. You benefit from better safety and lower energy consumption. Ensure that your mains power corresponds with the specifications of the appliance. The specifications are printed on the type label. Connect the mains cable to a properly installed and earthed wall outlet. Initial Operation Before making coffee for the first time operate the appliance twice with clean water only and without paper filter. This removes dust, which may have collected during transport. Follow the instructions given under "Operation". turning the Appliance On/Off · Press the "" switch in order to turn on the appliance. Press the " " switch in order to turn off the appliance or to cancel the brewing process. Fill cold water according to the desired amount of cups Of coffee into the rear water tank. You can determine the water level with the help of the scale in the water tank. NOTE: You can use the pot to fill the water tank. To open the lid of the pot, press the two latching lugs together simultaneously. One of the two handles must be on the right hand side and the other on the left. Push the filter holder down until it snaps in. Turn over the lower fold of the paper filter (size 1x4) and place it in the filter funnel. NOTE: Do not put too much coffee powder into the filter to avoid spillage. The button on the lid must face the handle. Note the recesses on the opening of the pot and the latching lugs on the lid. cAUTION: Drip stop Your appliance comes with a drip stop. This prevents the coffee from dripping onto the warming plate if there is still water in the filter. [. . . ] This is not a malfunction of the appliance. In order to comply with the Ecodesign Directive (2009/125/EC), the appliance turns off automatically after max. The right to make technical and design modifications in the course of continuous product development remains reserved. This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and is manufactured according to the latest safety regulations. [. . . ]