User manual CLATRONIC KM 2499 NEW

[. . . ] Handle this accessory with care to avoid injuries. Before changing the attachments, the appliance must be disconnected from the mains!Do not reach into the mixer vessel as the underlying blade may cause injuries under certain circumstances!The appliance is equipped with a safety switch. [. . . ] Switch on the appliance only once the presser in the opening of the lid is inserted. use only the supplied presser to press the food. Do not use your fingers, forks or other objects to avoid injuries or damage. Do not carry or lift the appliance during use. Always switch it off first and pull out the plug. Carry the appliance always with both hands!Clean the appliance only as described in , , Cleaning". Assembly of mixing bowl and lid Please all parts before using for the first time (see , , Cleaning"). Place the bowl (10) on the base (2) in such a way that the left mark on the bowl is pointing to the lower v mark on the base. Then turn the bowl clockwise until you hear it lock into place. Press the equipment you wish to use (grating or cutting attachments) - to be found in the accessories drawer (20) - as far as it will go on to the device holder (14). quantity 500 g 750 g 750 g 500 g 500 g 500 g 500 g 500 g 500 g up to 1. 5 l Utensil plastic knife plastic knife plastic knife metal knife cutting attachment 12 fine grater coarse grater grating attachment chip disk mixing vessel Level I to II II to III II to III II to III II to III II to III II to III II to III II to III III or P Max. Remove the plug from the socket before cleaning!Clean the bowl and the mixing vessel carefully immediately after each procedure. To do so, remove the bowl in order to be able to clean off any residues on the drive shaft. Use a moist towel to clean the outside of the basis appliance. Carrots), the plastic parts can be stained: clean them with oil. Any removable parts which have come into contact with food (utensil and bowls) can be cleaned in soapy water. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice!The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). [. . . ] The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Proof of the guarantee is provided by the proof of purchase. [. . . ]