User manual CLATRONIC KM 2894 PC 2

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] Lock the lid in place with the lock (7). Never fill with hot food or hard ingredients such as potatoes, ice, coffee beans, nuts, and so on. If you wish to fill in more food to be mixed you can remove the lid and cover. ATTENTION: Do not reach into the mixer vessel, as the underlying blade may cause injuries. If you are mixing cold food, insert the lock (7) into the centre of the lid. When mixing warm foods take off the clasp . Do not use the mixer when empty or without the lid. The mixing bowl must be held firmly in place during mixing. Level 1 = low rpm Level 6 = high rpm To switch the device off, turn the switch back to the , , 0" position. Hold the switch in this position according to the desired interval length. When the switch is released it returns automatically to the off position. In order to remove the mixer jug turn it counterclockwise. Clean the used parts as described in , , Cleaning". The safety cover (5) must be mounted on the drive shaft for the mixing drive (3). Press the whisk (14), dough hook (16), chopping knife (17) or cutting disc (27) down as far as possible. Never use more than one utensil at a time. place the lid (10) in position , as described under , , Positioning the Processor Bowl" above. Use the stopper (12) to press the food into the filling slot (11). exert a sufficient degree of pressure on the stopper. The appliance must be switched on only with the stopper (12) mounted into place. Use of the Stopper: The stopper (12) fulfils several functions: · With the measuring beaker (13) it is possible to measure out small quantities of fluids, e. 50 ml) and add them directly to the food through the flow limiter (12). [. . . ] Insert the plug into a 230 V / 50 Hz socket installed according to existing regulations and with earthing protection. Switch on the appliance and set a speed between 1 and 3 with switch (2). Now fill the filler shaft (11) with your ingredients. After cutting/grating, turn the switch (2) back to , , 0" and pull out the plug. [. . . ]