User manual CLATRONIC KM 3648

[. . . ] € Als de eerste worst de gewenste lengte heeft bereikt, druk de worst dan aan het eind van de worstmaker samen met uw vingers. 16 Instruction Manual Thank you for purchasing our product. We wish you much pleasure with the appliance. Symbols in this Instruction Manual Important safety information is explicitly marked. [. . . ] € Use the meat grinder as pasta maker, prepare an area where you can lay out the pasta later. Making sausage • You can use both natural and synthetic casings. € If you have opted for a natural casing, soak this casing some time in water before using it. • Tie a knot at one end of the casing. € Slide the casing over the sausage attachment. € Feed the sausage meat through the sausage attachment and fill the sausage casing. € Make sure that the sausage meat is "loosely" stuffed into the casing as the sausage expands in volume during cooking or frying and may cause the casing to burst open. € When the first sausage reaches the desired length, squeeze the sausage at the end of the sausage attach­ ment together with your fingers. € Turn the sausage once or twice around its own axis. € Until you have established some exercise routine, you can turn off the appliance after each sausage length. Shaping biscuits • Prepare a surface on which you can lay the cookies afterwards. € With the cookie cutter form (25) you can create different cookie shapes. € After having mounted the spiral housing with the cookie attachment (24) onto the appliance, slide the cookie cutter form into the cookie attachment. • Select the desired cookie form. € Hold the dough strand in your hand at the opening and cut off the desired length. Cover the drive shaft of the mixing drive with the safety cover (2). The spiral housing uptake on the appliance is protected with a cover (9). Remove the cover by turning it into the direction OPEN. Place the filling tray on the filler neck so that the uptake of the tablet is on the engine block. Slide the spiral (16) in the horizontal part of the spiral housing until the axle mechanically locks. The assembly of the accessories is described in the following sections. Prepare the meat grinder according to your desired application. [. . . ] € • • • For proper cleaning, remove the mixing bowl. Disassemble the mixing bowl after each use. Unscrew the screw lock of the mixing bowl. Remove the knife block and the sealing ring from the screw lock. [. . . ]