User manual CLATRONIC MC 1012 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] The stereo control light (25) beneath the adjustment knob only lights up when you have selected VHF stereo and receive the station in stereo quality. If reception is too weak and the station received crackles, it may be that this light will not come on. Try to improve reception by turning and bending or twisting and altering the length of the antenna. In this frequency band programs are transmitted in "mono" only. Push a recorded audio cassette, with the tape downwards and the listening side facing forwards, into the compartment. Press the PLAY button (15) in order to play the tape. Use the STOP/EJECT key to stop the playing. If necessary, run the tape forwards or backwards as required by means of the arrow buttons. Between switching over and also to stop the tape running functions, always press the STOP/EJECT button. By doing so, you can avoid damages to the device or to the tape. Make sure that the cassette is not protected against dubbing (the copy protection tab on the upper edge of the cassette must not be broken). Select the recording source with the function button (11) and if necessary start this source. You record from the source of sound to which you are listening. Playing can be interrupted briefly with the PAUSE key or stopped with the STOP/EJECT key. Press the PUSH/OPEN key to open the CD deck cover (8). Insert a music CD with the label facing upwards on the central button and close the CD deck cover (10). After a few seconds the total number of songs/tracks is shown in the display (23). Press the PLAY/PAUSE button (2) in order to play the CD. The song currently playing will be shown in the LED display. You can set the desired volume using the VOLUME control (9). By briefly pressing the SKIP II buttons (3/4) you can jump to the next or the previous track. Press once (the REPEAT LED (27) flashes): the current track is repeated continuously. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]