User manual CLATRONIC MC 1013 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] Note: When the POWER button is switched off the clock remains visible during standby operation. If the entire time display is flashing, this means that the stored time has been lost, possibly as a result of a power cut, and has to be set again. Press the POWER button (5) (2 on the remote control) in order to use the functions (as described under point 2) when the machine is on. After each press of the button it is possible to read in the LED display which function (CD, TAPE, AUXILIARY or TUNE) is activated. Use the SKIP/TUNING buttons, tune into the desired radio station. if the appropriate button is pressed down for approx. 1/2 a second, the fast search is switched on. The stereo control lamp (15) lights up if you are receiving the station in stereo quality. If reception is too weak and there is interference on the station being received, this symbol does not appear in the display. Try to improve the reception by turning or changing the angle of the aerial 6. proceed in a similar manner if you wish to receive MW/AM stations. In this frequency band all programmes are transmitted only in "mono". If you wish to store the selected station, first press the MEMORY button (11) (9 on the remote control). Now select the desired storage location using the REPEAT button (8) (10 on the remote control). When you wish to call up stored radio stations, press the REPEAT button (8) on the music centre (10 on the remote control). Push the function selector switch FUNCTION (13) (5 on the remote control) until the word "TAPE" appears in the display. Insert an audiocassette into the compartment with the tape facing downwards and the side you wish to listen to facing forwards. If necessary, fast wind the tape forwards with the F. When switching from one funcbackwards with the REWIND button I tion to another, or when stopping the cassette, always press the STOP/EJECT button í (24). In order to interrupt playback for a short time, press the PAUSE button II (25). Press the PAUSE button for a second time in order to continue playback. Insert an audiocassette with the tape facing downwards and the side on which you wish to record facing forwards. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]