User manual CLATRONIC MC 1014 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] If reception is too weak and there is noise on the station being received, this lamp will flicker. Try to improve reception by turning and bending or twisting and altering the length of the antenna. In this frequency band programs are transmitted in "mono" only. Lightly press an audio CD with the printed side facing upwards on to the central cone and then close the CD compartment lid (10). After a few seconds the total number of songs/tracks is shown in the display (19). Press the PLAY/PAUSE button (2) in order to play the CD. The song currently playing will be shown in the LED display. You can set the desired volume using the VOLUME control (9). To remove a CD, press the STOP key, open the CD deck with the PUSH/OPEN key (11) and take out the CD carefully. description of the CD buttons: PLAY/PAUSE (2): SKIP/SEARCH (4/5): the sound can be interrupted briefly. The PLAY/PAUSE control lamp (23) flashes Using this button you can jump to the next or previous title. If the button is kept pressed down, the machine 31 Starts to search through the tracks. Press once (the REPEAT LED (21) flashes): the current track is repeated continuously. Press a second time (the REPEAT LED emits a fixed light): the whole CD is played continuously. press a third time: the function is deactivated. Press once = the first track number that is to be played appears in the display. All the tracks are played one after other at random. Press a second time = all the functions are reset. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]