User manual CLATRONIC MC 1015 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] If necessary, run the tape forwards or backwards as required by means of the = forwards (35); = backwards (34). Always press the / Stop/Eject button when switching over or stopping the tape running function. By doing so, you can avoid damages to the device or to the tape. When the / Stop/Eject button is pressed again the flap of the cassette compartment opens. Make sure that the cassette is not protected against dubbing (the copy protection tab on the upper edge of the cassette must not be broken). Select the recording source with the function button (6, 18, 20) and if necessary start this source. You record from the source of sound to which you are listening. Recording can be briefly interrupted with the II Pause button or stopped with the / Stop/Eject button. Press the PUSH/OPEN key to open the CD deck cover (2). Insert a music CD with the label facing upwards on the central button and close the CD deck cover (1). "- -" appears in the display (13) followed by the number of tracks. Press the PLAY/PAUSE button (9) in order to play the CD. The song currently playing will be shown in the LED display. The desired volume can be sent using the VOLUME regulator (12). To remove a CD, press the STOP key (11), open the CD deck with the PUSH/OPEN key (2) and take out the CD carefully. Press once = This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. Press a third time = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks. With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks. Press once (The REPEAT control lamp flashes (8)): the current track is repeated continuously. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]