User manual CLATRONIC MC 1020 DVD 2

[. . . ] Before attempting to connect, operate or adjust this player, please read these instructions completely. (Back of player) The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's en-closure that may be of sufficient magnitude to constitute a risk of electric shock to persons. May we take this opportunity to thank you for purchasing this DVD/VCD/CD player. We strongly recommend that you carefully study the Operating Instructions before attempting to operate the player and that you note the listed precaution. [. . . ] Once the initial programming is entered it is retained in memory until changed, the player can always be operated under the same conditions. The settings will be retained in the memory until the settings are changed even after setting the player to the standby mode. Use the navigation buttons to select preferred item, then press ENTER button, each screen for setting the value is displayed. Press SETUP button to close setup menu in any mode. Use left navigation button to switch to another main setup items 2 ANGLE MARK - it is used to select whether or not The multi- angle icon is display on the screen when a Multi-angle DVD disc is playing. LANG - it is used to select different On Screen Display language for different user. 4 SCREEN SAVER - when the player is not in used for 2 minutes, a running DVD logo will move across the TV screen to protect the TV CRT. The first Power on this set by press power button on the front plane without placing any disc on this tray, press setup button, then you can enter the Preference Page by pressing navigate button . 1 SPEAKER SETUP - it is used to set the speaker Outputs levels DOWNMIX mode Options: LT/RT-Left/Right mix mode STEREO - Select this option if you don't Have a 5. Front Speaker Options: Large- select this option to increase the front speaker's volume. Small- select this option to decrease the front speaker's volume. (DVD only - need disc software support) 4. 3 SUBTITLE - select preferred subtitle language. (DVD only - need disc software support) 4. 4 DISC MENU - select preferred disc menu language. (DVD only - need disc software support) 4. You must set PASSWORD MODE OFF to enable this selection. (DVD only - need disc software support) 4. Otherwise, they will output At the same format:RAW or PCM. Recommended settings: SPDIF OUTPUT: SPDIF OFF (if you are not connecting to an amplifier via Digital output) SPDIF OUTPUT: SPDIF/RAW (Used in general home theater, select this can output 5. 1 channel) SPDIF OUTPUT: SPDIF/PCM (select this it can only output 2 channel, but you will get high quality audio) 2 LPCM OUT - set bit-rate of coaxial and optical output Options: 96K/48K (If you are connecting to an amplifier via digital output please reference your digital amplifier manual before you select this option) 1) Enter old password in the Old Password row 2) Enter new password in the New Password row 3) Enter the new password again in the Confirm PWD row You may reset the password if you forget the old password by using the supervisor password: 1379 TO PLAY THE RADIO Connect the unit to the power source. press POWER ON/OFF button to turn on the unit. [. . . ] Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. This DVD/VCD/CD player is protected by MACROVISION and no unauthorized copy can be made by VIDEO CASSETTE RECORDER. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. [. . . ]