User manual CLATRONIC MRC 496 NEW

[. . . ] When using external mains supply, pay attention to the correct polarity and voltage. Always place the batteries in the correct direction. Assemble the device in such a way that the available ventilation openings are not covered. [. . . ] Radio station tuning Shift the function switch on the left side of the device to the ON position and select the desired frequency band with the band selector on the right side. Setting of the Clock Hours: Minutes: Keep the TIME button and the HOUR button pressed simultaneously until the desired hour is reached. Keep the TIME button and the MIN button pressed simultaneously until the desired minutes are reached. Setting of the Alarm Hours: Minutes: Keep the ALARM button and the HOUR button pressed simultaneously until the desired hour is reached. Keep the ALARM button and the MIN button pressed simultaneously until the desired minutes are reached. If you wish to awaken with a beep, turn the volume knob on the right side of the device back until it snaps. Automatic Alarm Interval The automatically set alarm function can be switched off for approximately 9 minutes by pressing once the SNOOZE button. If this is not the case, the device switches off after approximately one hour until the next day when the set alarm time is reached again. delayed Shut-Off The preset time can be adjusted by pressing simultaneously the MIN and HOUR buttons. The sleep function can be set for a maximum of 1 hour and 59 minutes. It is used as a memory buffer for the settings in case of blackout. Clean the appliance with a slightly humid cloth without any additives. This appliance conforms with the CE directives for radio interference suppression and low-voltage safety and has been built to meet current safety requirements. Subject to technical changes without prior notice!We undertake to guarantee the appliance sold by our company for 24 months as of the date of purchase (cash receipt). Within the guarantee period we rectify faults to the machine free of charge which result from material or manufacturing faults, either by repairing the machine or, or our discretion, by replacement. [. . . ] Motor pistons, kneading hooks, drive belts, spare remote controls, spare toothbrushes, saw blades, etc. ) nor the cleaning, maintenance or change of wearing parts fall under this warranty and hence are subject to payment of costs!Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service. [. . . ]