User manual CLATRONIC RA 2725 2

[. . . ] always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type. Pay careful attention to the following "Special Safety Instructions". Special Safety Instructions for this Device ⷠThis device becomes hot during use. [. . . ] In order to avoid overheating it is important that the air inlets and outlets are kept clear. Never suspend objects in front of or above the radiator. do not use the radiator in the open air. This radiator is not suitable for use in bathrooms, washing rooms or rooms which are used in a similar manner. The radiator must never be placed in a position where it could fall into a bathtub or other water container. The radiator should not be placed directly below a mains power socket. The radiator should only be used in an upright position. If the radiator should fall over, first remove the plug from the socket and allow the radiator to cool down before returning it to an upright position. Before the radiator is used, the rollers must be attached. to do so , place the radiator upside-down (hold the underside facing upwards); avoid hard surfaces. In the case of oil radiators with 5 to 10 fins, the rollers should be attached in the right position between the first and second and between the last and penultimate fins. For models with 5-6-7 and 8 fins, the U-shaped roller carriers are used. For oil radiators with more than 10 fins, the straight roller carriers between the second and third fin must be attached to both ends. Pass the U-shaped clamps through the holes of each roller carrier and then tighten the wing nuts. Q qq qqq = low power = medium power = high power The control lamps light up during heating operation. (only for radiators with heater blowers) In order to heat up the room more quickly the blower can be switched on. ­ only the heater blower is running qqq ­ the heater blower + first and second heating level Please note that this paragraph only refers to the following model: RA 276 G In order to find the ideal thermostat setting, turn the thermostat control clockwise to "max". As soon as the desired temperature has been reached, turn the thermostat regulator slowly anticlockwise until the radiator switches off. The radiator will now automatically stay at the desired temperature. Always remove the power cable from the socket and allow the radiator to cool down before cleaning it. [. . . ] Without proof of purchase no free replacement or repair will be carried out. If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]