User manual CLATRONIC SLS 570 NEW

[. . . ] For optimum installation of the loudspeakers, please follow the instructions below: LS: L: SW: C: R: RS: Left surround speaker (back) Front left speaker Subwoofer Center speaker (middle) Front right speaker Right surround speaker (back) To avoid the risk of fire or an electric shock, you should not expose the device to rain or moisture. Consequently, does not use the device in the immediate vicinity of water for example near a bath tub, a swimming pool or in a damp cellar. Use the device only for the intended purpose. When using external mains supply, pay attention to the correct polarity and Voltage, Always place the batteries in the correct direction. [. . . ] Because the center speaker(C) is an anti-magnetic unit, so you can put it on the top of TV. Due to the center speaker you can place main speakers (front speakers) (L) and (R) far from each other properly. 1 The channel input can be connected to a DVD player with integrated decoder. Dolby Surround Pro Logic Front left, Front right, Subwoofer, Center, Surround channel level adjustment (Level adjustment) Full function remote control. Bass Management meet Dolby/DTS requirement Economy Standby mode, meet Europe blue angle standard Super blue light bar Frequency is stronger than the bass, so you can place the subwoofer (SW) at any corner in a room. If you like stronger sub-bass, you can place the subwoofer near listener. Besides subwoofer all speakers' center axis should be placed on height of listener's ear. Surround speakers (LS) and (RS) should be put two sides behind viewing place and let the speakers face to listener's location. Please ensure that the polarity is correct (see the floor of the battery compartment or the inscription on the outside)!If the remote control is not used for a prolonged period, remove the batteries in order to prevent battery acid leaking. Always replace the complete set of batteries. Warning: batteries are not to be disposed of together with domestic wastes. Dispose of the used batteries at the relevant collection bin or at your dealer's. connecting speakers Center Speaker Front right speaker Front left speaker 1ch input: used for connecting an external sound source to a 5. CD: used for connecting an external sound source to a CD output (e. AUX input: used for connecting an external sound source to a CD output (e. L & R: Left & Right output for connecting the front loudspeakers (front left channel use white color, front right channel use red color) 5. C: Output for connecting the center loudspeaker (Center channel use yellow color) 6. LS & RS: Output for connecting the Left & Right surround loudspeakers (surround left channel use green color, surround right channel use brown color) · Note: When connecting the lead, ensure the correct polarity of the output sockets!The each color connections of the loudspeaker outputs on the subwoofer must be connected to the each color sockets of the appropriate loudspeaker!No sound but with The speaker cable is disconnected. No sound from Reconnect the speaker cable the front speakers correctly. [. . . ] For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge. [. . . ]