User manual CLATRONIC SRR 616 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] Insert an audiocassette with the side on which you wish to record facing forwards (full reel on the right). Ensure that the cassette is not copy-protected (the copy protection tab on the top narrow side of the cassette must not have been removed). Select the source from which you wish to record with the function switch (3) and then start playback from this source if necessary. The sound source which you are listening to is the one from which the recording is made. the recording level is controlled automatically. Any changes to the sound and volume do not affect the recording. Please press the b record button (21) (the playback button is automatically pressed down at the same time). The recording can be interrupted briefly using the II pause key (26), or stopped by means of the í/ stop/eject button (25). Insert a CD with the printed side facing up and close the CD deck. , , - -" appears in the display (19) followed by the number of tracks. press the / II CD PLAY/PAUSE button (16) to listen to the CD. With I SKIP + (15) you can jump to the next or previous track etc. If the button is kept pressed down, the machine starts to search through the tracks 7. The I SKIP button (17) can be used as follows: Press once = This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. Press a third time = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks. To remove a CD, press the CD STOP key (6), open the CD deck with the PUSH/OPEN key (12) and take out the CD carefully. If a reading error has occurred the letters "Er" (Error) appear. By lightly pressing either the SKIP button you can jump one track forwards or backwards. Press three times: The function is deactivated and the CD is played in the normal mode. Programmed Play This can be used to program any desired sequence of tracks. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]