User manual CLATRONIC TVL 2976 NEW

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] It can be caught in the fan owing to the air turbulence!Use the appliance only with the protection grids on!The appliance must be assembled completely before use!Do not use the fan in premises where gasoline, paints or inflammable liquids are used or stored. The fan must be used only in the envisaged position (standing). Do not throw the packing away, but keep it for the whole life of the warranty. Insert the plug in the socket only once you have carefully read instructions and assembled the fan completely. Mount the front and rear stand plates so that the power cable is inserted through the resulting slot (C) and the plug is located on the lower face of the stand plate. Attach the fan to the bottom plate by slightly lifting the fan and fitting in the bottom plate. Tighten the two fastening screws (A) to attach the bottom plate. 3 speeds can be selected with the press buttons 0 ­ 3. Switch the ventilator off by turning the rotating switch to the OFF position or by pressing the 0 button. Never dip the device in water when cleaning. If the device is very dirty wet a cloth with water and then wipe the device dry once you have finished. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice! [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]