User manual CLATRONIC VCR 621 NEW

[. . . ] 24 months guarantee according to guarantee declaration · RF cable Important Copyright Information Unauthorised recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We do not take responsibility for the unauthorised duplication, use, or other acts which infringe upon the rights of copyright owners. A Note About Recycling This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. [. . . ] 5) Press PLAY/o or STOP/L repeatedly to select the position number you want to change the channel, then press You cannot select a position number where "- - -" appears next to the number. This is because SKIP is set to [ON] for this position number. ⷠWhen a weak signal is received in Channel Reprogramming mode, you can change the background to static blue by pressing TAPE COUNTER RESET. If you press the button again, the background will return to the static screen. 6) Press PLAY/o or STOP/L repeatedly until the channel move to another position number, then press F. When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing CHANNEL (o/p) until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. Power will automatically turn on and playback will start. (Direct Button Operation) · Using the buttons on the remote control Press FUNCTION to turn on, and then press PLAY/o. FWD/B or REW/s during playback to view a videotape at a high speed in either a forward or reverse direction. 2) Press the button again, the VCR will now search in super high speed. Press PAUSE/STILL during playback to view a still picture on the TV screen. ⷠIf you press PAUSE/STILL to freeze the picture, usually there will be noiselines on the TV screen. This is normal, however, each time you press PAUSE/STILL the lines will change position. ⷠWhen the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL (o/p) in the Still mode. ⷠAfter the VCR has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head. <Note for "Speed Search" and "Still Picture"> · Usually there will be video "noise" lines (black and white streaks or dots) on the screen. The still picture will, in addition to containing the "noise" lines, be black and white. This is not a fault of the machine but merely a by-product of the technology involved in producing a VCR with LP mode. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. You can record one programme while viewing another. [. . . ] Head cleaning is necessary, consult the nearest Authorized Service Centre. Adjust tracking control for a better picture by using CHANNEL (o/p). You cannot copy a copyrighted video tape. You are experiencing copy guard protection. [. . . ]