User manual CLIFFORD 30

[. . . ] World-Class Auto Security TM concept 30 Owner's Manual World-Class Auto Security TM concept 30 Installation Manual Table of Contents Standard Features of the Concept 3O Welcome . . . . . . . . . . . . . . . . 5 Your 4-button/12-channel remote controls . 6 How to use your keychain remote control . To transmit either channel 1, 2, 3 or 4 . [. . . ] Only ACG can make a car alarm impervious to code-grabbing, and only Clifford systems have ACG with Random Code Encryption. Enhanced AutoArmingTM If this feature is enabled and you forget to remotely arm your Concept 30, the system will arm itself automatically ("passively") 30 seconds after the vehicle doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. Concept 30 includes all these additional Enhanced AutoArming features: AutoArming enable/disable: If you prefer, you may deactivate or reactivate the AutoArming feature. See User-selectable features on pages 16­17. Visual acknowledgment: Five seconds after you exit the vehicle and close all the doors, the parking lights will flash twice to confirm that the AutoArming countdown is progressing. Then, 25 seconds later, the system will AutoArm. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on pages 16­17. Instant AutoArming bypass: Prevents AutoArming when fueling the vehicle and other times when you wish to temporarily bypass AutoArming. To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF. " You will hear a single siren chirp to confirm that the system will not AutoArm. The system reverts to its normal operating mode when you next start the engine. NOTE: To prevent AutoArming when fueling the vehicle, either use the Instant AutoArming Bypass feature noted above, or leave one of the doors open. 9 UltraSecureTM Coded Valet Mode Your secret valet code Within seconds, thieves can disable all other alarm brands by hot-wiring the ignition and flicking an easy to find "hidden" valet switch. Your Concept 30 has safeguards that absolutely ensure that a thief cannot enable the valet mode as a way of "turning off" your system. To enable valet mode, the driver must first enter a secret valet code on the PlainView switch. Your code will be a 1-to-3-digit number of your choosing. Each digit can be any number from 1 to 9, (i. e. the code can be any number between 1 and 999, except those that contain a zero). Whenever the system is put in valet mode, all of the system's security features are switched off. At various times, you will need to switch the system off. For instance, when having your car serviced, washed or parked by a valet. NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. Definitions Digit: A digit is defined as any number from 1 to 9, inclusive. Valet code: A valet code may be 1 to 3 digits: A one-digit code=X=any number between 1-9 A two-digit code=XY=any number between 11-99 (excluding numbers with zeros) A three-digit code=XYZ=any number between 111-999 (excluding numbers with zeros) Remember, no code can have a zero. A rocker switch mounted on the dashboard or console. [. . . ] To change any of the settings, use the procedure noted. To restore the feature to its factory setting, just repeat the procedure: 1. Select the feature you wish to program from the table below and on the following page. Note the number of momentary (spring-loaded) presses. [. . . ]