User manual CLIFFORD AVANTGUARD 5.1

[. . . ] AvantGuard 5. 1 O Owner's Guide limited lifetime consumer warranty Directed Electronics ("Directed") promises to the original purchaser to repair or replace with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories, carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days of the date of purchase to the address listed on the card; the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by installation or removal of the unit. [. . . ] If the feature has more than two settings, continue pressing on the transmitter to toggle through the settings. To advance to the next feature in the same column, press the same number of times as the desired feature within 60 seconds; to change a feature in a different column begin at step 4 by entering the column number first and then the row 4. 5. 6. © 2 0 0 6 d i re c t e d e l e c t ro n i c s -- a l l r i g h t s re s e r v e d 23 number. to the Feature Descriptions sections of this guide for impornote: Refer tant notes and descriptions of the system features and programming. 7. Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2 Valet switch. The siren will chirp three times to indicate programming mode has been exited. user selectable features Then Press First Press Add new remote (autolearn) Auto (passive) arm off/on Chirps off/on/quiet Auto lock off/ignition/rpm Auto unlock off/ignition Auto (passive) arm and lock off/on Siren duration 30/60/90 Second unlock off/on Not used Set PIN code (default = 2) Select siren sounds FACT II off/on Remote valet off/on Entry delay off/on Reset to default (except transmitter and valet code) Panic off/on New remote learn arm/disarm only New remote learn accessory A channel New remote learn accessory B channel New remote learn silent mode New remote learn remote valet New remote learn remote start* New remote learn window down/vent** Autostart setting* New remote learn (off/battery only/ accessory C channel temp only/ battery and temp) BlackJax off/on Clear all remotes * This feature is only available with IntelliStart connected. ** This feature is only available with optional SmartWindows connected. 24 user selectable features descriptions - column one add new remote (auto learn) Auto-learn new five-button remote controls to the system in the standard button configuration. Once you have entered the feature, press on the transmitter until you hear a confirmation chirp. auto (passive) arm - off/on Off: The transmitter must be used to arm the system. On: When the system sees the ignition turn off and the last protected entry (door, hood, or trunk) close, it will begin a 30-second countdown before arming itself. After the first five seconds, you will hear two chirps and the lights will flash. chirps - off/on/quiet Off: Chirps will not sound when arming/disarming the system. On: Chirps will sound when arming/disarming the system. Quiet: Chirps will sound when arming/disarming the system but at a lower volume than normal. auto lock - off/ignition/rpm Off: The doors will not lock automatically. Ignition: The doors will automatically lock three seconds after the ignition is turned on unless a door is open at that time. Rpm: The doors will lock when the system sees the engine reach a preprogrammed RPM. © 2 0 0 6 d i re c t e d e l e c t ro n i c s -- a l l r i g h t s re s e r v e d 25 auto unlock - off/ignition Off: The doors will not automatically unlock when the ignition is turned off. Ignition: The doors will automatically unlock as soon as the ignition is turned off. auto (passive) arm and lock - off/on Off: The doors will not lock when the system passively arms. On: The doors will lock when the system passively arms. This feature only applies when passive arming is programmed on. siren duration - 30/60/90 The system will sound the alarm for the programmed duration (30/60/90 seconds) during an alarm trigger or when the system is put into panic mode. second unlock - off/on Off: Second unlock output is pulsed at the same time as the unlock output when the system is disarmed. On: Second unlock output is active when the arm/disarm button is pressed within 10 seconds of disarming the system. note: The second unlock can be installed by your dealer. [. . . ] Primary zone can now be re-adjusted as described in step 4. Or press again to exit programming mode. The siren will chirp 3 times when sensor adjustment mode has been exited. note: You must wait 15 seconds after arming for the omnisensor to become active. © 2 0 0 6 d i re c t e d e l e c t ro n i c s -- a l l r i g h t s re s e r v e d 45 glossary of terms 507M Tilt sensor: This sensor detects when the vehicle is being raised in an attempt to either remove the wheels/tires or tow the vehicle. This sensor is capable of learning the vehicle's initial inclination angles each time the vehicle is parked. Control Unit: The "brain" of your system. Usually hidden underneath the dash area of the vehicle. [. . . ]