User manual CME GPP-3

[. . . ] USB Programmable Grand Piano Style MIDI Pedal User's Manual ---------------------------------- ModelGPP-3 Read "Precautions" on page 5 before use Please ready this manual carefully before use. Please keep this manual for reference. Thank you for choosing CME GPP-3 -- USB Programmable Grand Piano Style MIDI Pedal Please keep all the important information here Attach your invoice or receipt here for reference Purchase date Dealer's name and addr. Warning: Improper connection may cause damage to the device. Copyright Copyright of the manual belongs to Central Music Co. [. . . ] Always follow the instructions on the instrument. Before cleaning the instrument, always remove the electric plug from the outlet as well as the USB cable. When cleaning, use a soft and dry cloth. Do not use gasoline, alcohol, acetone, turps or any other organic solutions; do not use liquid cleaner, spray cleaner or too wet cloth. Do not use the instrument near water or moisture, such as bathtub, washbasin, washing poor in the kitchen or similar places. Do not place the instrument in an unstable position where it might accidentally fall over. Do not jam sinks or holes of the instrument; those sinks of holes are used for air circulation to prevent the instrument from overheating. Do not place the instrument near heat sink or any places with poor air circulation. Do not place anything on the power cord. Make sure the power cord is set on a safe place, so nobody will step on it and no body will trip over it. Do not overload the outlet and the AC cable to avoid fire or electrical shock. Do not insert anything in the instrument, which may cause fire or electrical shock. Do not splash any kind of liquid to the instrument. Do not disassemble the instrument in case of accidental electrical shock. Always take the instrument to a qualified service center in need of repair. You will cause yourself in danger if you open or remove the cover, and improper assembly may cause electrical shock in the future use. Unplug all the connectors and take the instrument to a qualified service center if anything in the below listed happens: A. The power cord or connector get hurt or worn out. The instrument gets rain or water splash. The instrument dose not work properly after following all the instructions regarding to the trouble shootings. The instrument falls down or gets broken. Do not use the instrument when thundering; otherwise the thundering may cause long-distance electrical shock. [. . . ] Follow the below steps to assign a controller#: I. After you power on the product, depress all the three pedals for 3 seconds. Then the 3 LEDs flash slowly to show, that the product is ready for assigning controller#. Depress one of the three pedals, to select the pedal you want to assign. [. . . ]